← Back to blog
5 min read

Can you do a takeoff from PDF drawings with AI?

Yes. AI takeoff measures off the PDF set you get at tender. How well it goes depends on whether the PDF is vector or scanned, and whether the scale is checked on every sheet first.

TL;DR: Yes. AI takeoff measures lengths, areas and counts straight off the PDF drawings you get at tender. It works best on vector PDFs exported from CAD or Revit, where every wall is still a line the software can read. Scanned PDFs can be measured too, but they need more checking. Either way the scale has to be calibrated on every sheet against a printed dimension before anything is measured, and every quantity should come back with a markup you can check.

A tender lands on a Friday afternoon. 180 sheets, all PDF, closing in 3 weeks. Nobody sends the Revit model.

So the question I get from estimators is whether AI can measure off the PDFs they've actually got. It can. How well depends on what kind of PDF it is.

What kind of PDF do you have?

There are 2 kinds and they behave very differently.

A vector PDF is exported straight from CAD or Revit. Every wall is stored as a line with coordinates and the text is still text. Zoom to 800% and the lines stay sharp. You can click on a room name and select it.

A scanned PDF is a photo of a printed sheet. Zoom in and it goes soft, and you can't select anything.

The PDF format is set out in ISO 32000, and it lets 1 page hold line work, text and images together. So a set can be 170 vector sheets with 10 scans mixed in - usually the survey and the existing conditions drawings.

Check before you run anything. It takes 2 minutes and it tells you which sheets to look at hardest afterwards.

How does AI get the scale right on a PDF?

This is where takeoffs go wrong, by hand or by AI.

A PDF page knows its own size in points - 72 to the inch under ISO 32000. It doesn't know the drawing is 1:100. The scale lives in the title block, the scale bar and the dimensions, and those 3 don't always agree.

Here's a synthetic example. A floor plan is drawn at 1:100 on A1. Someone prints it to A3 and saves that as the PDF. Under ISO 216 an A1 sheet is 841 × 594 mm and an A3 is 420 × 297 mm, so every line on the page is now half as long. The title block still says 1:100.

Measure off the title block and an 8,400 mm wall comes out at 4,200. That's half your plasterboard gone and nothing on the sheet looks wrong.

So the scale gets set off a printed dimension. Find a dimension string that says 8,400, measure that same line on the page, and work the scale out from there. Then check a second dimension running the other way, because a scan can stretch in 1 direction.

2 more things to watch.

Sheets with more than 1 scale. A plan at 1:100 with details at 1:20 on the same sheet needs each view calibrated on its own.

Sheets marked not to scale. Nobody can measure those reliably, person or software. Use the written dimensions and raise an RFI for anything that's missing.

What measures well off a PDF?

Anything drawn to scale and tagged consistently.

And then the stuff that still needs a person.

How do I check a takeoff that came off a PDF?

Same way you'd check a cadet's.

  1. Open the markup for the 3 or 4 lines that carry the most cost. The runs should cover what you expect and nothing else.
  2. Measure 1 run yourself on 1 sheet and compare.
  3. Read the list of sheets the tool couldn't calibrate and the elements it couldn't classify. If that list is empty on a 180 sheet set, be suspicious.
  4. Check the revision in the title block against the current transmittal. A clean takeoff off rev B is no good if rev C came in on Tuesday.

If a quantity comes back with no markup behind it, you're back to trusting it or measuring it again. I'd measure it again.

How CIM Build does it

Upload the PDF set, or pull it in from Procore, Aconex, Autodesk or SharePoint, and ask for the quantity in plain English. CIM Build's AI takeoff calibrates the scale on each sheet against the dimensions printed on it, measures with code, and gives you a results table with a marked-up copy of the sheet.

Those quantities feed a bill of quantities for each trade, with the source sheet on every line, and it exports to Excel.

Frequently asked questions

Can AI do a takeoff from a scanned PDF? On a clean scan with dimensions you can read, yes, but check more lines than you would on a vector set and calibrate in both directions. On a poor scan, ask for the original export before you measure anything.

Do I need the CAD or Revit files for AI takeoff? No. PDF is what gets issued at tender, and that's what AI takeoff measures from. CIM Build works with PDF drawing sets and opens IFC models alongside them if you have one.

What if the title block scale and the scale bar disagree? Go with the printed dimensions. Measure a dimensioned line, set the scale from that, and treat the sheet as flagged until a second dimension confirms it.


Published by CIM.BUILD. This is the text of https://www.cim.build/uk/blog/ai-takeoff-from-pdf-drawings without the site design. Index of all pages. Contact.