← Back to blog
4 min read

What is AI takeoff? A guide for builders and estimators

AI takeoff measures lengths, areas and counts off construction drawings. How it works, where it is reliable, where it needs a person, and how to check the numbers before they go into a price.

TL;DR: AI takeoff is software that measures quantities off construction drawings: wall lengths, floor areas, volumes and counts of doors, fixtures and penetrations. Good AI takeoff calibrates the scale on each sheet before it measures, tells you which sheets it could not calibrate, and marks up every measurement on the drawing so an estimator can check it. It does the measuring. The estimator still decides what gets priced.

What a takeoff is

A takeoff (or quantity takeoff) is the list of measured quantities a builder or subcontractor prices from. Each line has a description, a unit and a quantity: 214.6 m of W1 partition, 579 m² of plasterboard, 12 access panels. On most jobs the estimator produces it by tracing lines and counting symbols in a PDF markup tool, sheet by sheet.

A bill of quantities (BoQ) is the takeoff organised into a priced document, usually by trade, with every line described so a subcontractor can put a rate against it. In Australia, BoQs prepared by quantity surveyors usually follow the Australian and New Zealand Standard Method of Measurement (ANZSMM).

What changes with AI takeoff

With AI takeoff, the estimator asks for the quantity and the software does the measuring. A typical request reads like an instruction to a cadet: "Measure the internal wall lengths on Level 3 by wall type."

The software then has to do 4 things:

  1. Find the right sheets. Floor plans for wall lengths, reflected ceiling plans for bulkheads, schedules for door counts.
  2. Calibrate the scale. Read the scale bar, the title block and known dimensions on the sheet, and check they agree. A sheet printed at A3 from an A1 original measures at half its stated scale.
  3. Measure. Trace the runs, compute the areas, count the symbols, and group the results the way you asked.
  4. Show its working. Return a table of results and a marked-up copy of each sheet, with every run numbered to its row.

Step 4 is the one to judge a tool on. A quantity with no markup behind it has to be trusted or measured again, and both cost the estimator time.

Where AI takeoff is reliable

AI takeoff measures well on drawings that are drawn to scale, dimensioned, and consistently tagged. Floor plans with wall types tagged, door schedules that match the plan tags, and reflected ceiling plans with clear grid lines all measure cleanly.

It also does well on the repetitive work estimators least enjoy: counting fixtures across 30 sheets, measuring skirting room by room, or summing areas by finish across a tower.

Where it needs a person

How to check an AI takeoff

Check it the way you would check a junior estimator's work:

  1. Open the markup for the 3 or 4 lines that carry the most cost and confirm the runs cover what you expect.
  2. Measure one line yourself on one sheet and compare.
  3. Look at what the tool flagged: sheets it could not calibrate and elements it could not classify.
  4. Confirm the quantities are against the current revision. If a new revision has arrived, re-run the takeoff and compare.

How CIM Build does it

CIM Build's AI takeoff takes a plain-English request, calibrates each sheet's scale, measures with code and returns a results table with a marked-up copy of the sheet. The quantities feed a bill of quantities for each trade, tied to the scope of works built from the same drawings and specification, and export to Excel.

Frequently asked questions

Is AI takeoff accurate enough to price from? On drawings that are to scale and dimensioned, yes, once the estimator has checked the lines that carry the most cost against the markup. Treat it like any takeoff: checked before it is priced.

Does AI takeoff work on PDF drawings? Yes. PDF is the format most builders receive at tender, and CIM Build measures directly off the PDF set.

Does it replace the quantity surveyor? It replaces the measuring. The QS or estimator still decides what is measured, how it is described and what gets priced.


Published by CIM.BUILD. This is the text of https://www.cim.build/uk/blog/what-is-ai-takeoff without the site design. Index of all pages. Contact.