Feature

AI takeoff

Lengths, areas and counts measured off your drawings, with every measurement marked up.

Upload the drawing set and ask for the quantity in plain English: wall lengths by type, floor areas by finish, doors by fire rating, travel distances from a room to the nearest exit. CIM calibrates the scale on each sheet, measures with code, and returns a table of results with a marked-up copy of the sheet, so the estimator can see exactly what was measured and check it before it goes into the price.

Book a briefing
CIM Build · Riverside Stage 2 · Takeoff · Level 3 internal walls
Wall typeLengthSheet
W1 · 92 mm stud, 1 × 13 mm each side214.6 mA-1103
W3 · acoustic, Rw 4586.2 mA-1103
W5 · fire-rated, FRL -/60/6041.8 mA-1103
Untagged partition near corridor C36.4 mCheck type

Request

Measure internal wall lengths on Level 3 by wall type.

Scale

A-1103 · 1:100 at A1, checked against grid 3 to 4

Marked-up sheet attached. Each run is numbered to its row.

Wall lengths measured by type off one sheet, with the scale check and a marked-up copy behind every row.

The old way

Days of the tender spent measuring by hand

With CIM

Quantities measured from the set, with the markup to prove each one

Send a drawing set and the quantities you need. We'll run the takeoff on your job.

Book a briefing

Find out what your current set is hiding

See CIM in action

Published by CIM.BUILD. This is the text of https://www.cim.build/uk/features/ai-takeoff without the site design. Index of all pages. Contact.