Feature
AI takeoff
Lengths, areas and counts measured off your drawings, with every measurement marked up.
Upload the drawing set and ask for the quantity in plain English: wall lengths by type, floor areas by finish, doors by fire rating, travel distances from a room to the nearest exit. CIM calibrates the scale on each sheet, measures with code, and returns a table of results with a marked-up copy of the sheet, so the estimator can see exactly what was measured and check it before it goes into the price.
Book a briefing| Wall type | Length | Sheet |
|---|---|---|
| W1 · 92 mm stud, 1 × 13 mm each side | 214.6 m | A-1103 |
| W3 · acoustic, Rw 45 | 86.2 m | A-1103 |
| W5 · fire-rated, FRL -/60/60 | 41.8 m | A-1103 |
| Untagged partition near corridor C3 | 6.4 m | Check type |
Request
Measure internal wall lengths on Level 3 by wall type.
Scale
A-1103 · 1:100 at A1, checked against grid 3 to 4
Marked-up sheet attached. Each run is numbered to its row.
Wall lengths measured by type off one sheet, with the scale check and a marked-up copy behind every row.
The old way
Days of the bid spent measuring by hand
Every line is clicked and counted manually
On a mid-size bid, the estimator spends days tracing walls and counting symbols in a PDF markup tool before any pricing starts.
A new revision means measuring again
Drawings change after the takeoff is done, and the quantities quietly drift from the set they were priced on.
Nobody can check where a number came from
A quantity in a spreadsheet with no markup behind it gets trusted or re-measured. Both cost time.
With CIM
Quantities measured from the set, with the markup to prove each one
Ask for the quantity in plain English
Wall lengths by type, areas by room or finish, counts of doors, fixtures or penetrations. CIM works out which sheets to read.
Scale calibrated on every sheet
CIM calibrates each sheet's scale against the dimensions printed on it before it measures anything.
Every measurement marked up on the sheet
The result comes back as a table and as a marked-up drawing, so the estimator checks the takeoff the same way they would check a junior's.